-
Fully automatic pressure equipment with 2 or 3 (MVP) / 4 (SVP) vertical high pressure pumps in two variable speed models. The MVP and SVP variable speed models have continuous speed regulation on each pump through the frequency converter in the pump for asynchronous motors (MVP) or the PumpDrive speed regulation system and the KSB SuPremE motor (SVP), for fully electronic control of the required supply pressure. Equipped with central fuse box. -
-
Submersible, vertical centrifugal pump, polypropylene monobloc with noryl impeller, IP 68, single-stage, with level control in single-phase version, immersion depth 2 m. includes 10 m of cable. Applications: Automatic drainage of buckets, wells, tanks and warehouses at risk of flooding, reduction of surface water levels, drainage, drainage of underground passages, extraction of water from rivers and reservoirs.
-
Submersible, vertical, single-stage, floodable and non-self-priming monobloc electric pumps, for installation in humid areas. They have a dilacerator (S), a free passage impeller (F) or a diagonal open channel (D), in a fixed and transportable version. Available in ATEX version, ideal for pumping raw, activated and digested sludge, dewatering and water extraction, drainage of rooms and surfaces subject to risk of flooding.
- Maximum discharge diameter: 100mm
- Maximum flow: 135 m³/h
- Maximum pressure: 47m
- Maximum operating temperature: 40°C
- Maximum turning speed: 3500rpm
- Type of fluid handled: Sludge
-
CL 95 Motores sumergibles en baño de aceite, atóxicos, completamente rebobinables, conexión NEMA. Carga axial: de 3000 a 6500 N. Diseñados, fabricados y probados en los talleres SAER, los motores de la serie CL aseguran una gran fiabilidad. El Made in Italy garantiza altos estándares de calidad. Para temperaturas de hasta 35 °C. CLE 95 Motores sumergibles en baño de aceite, atóxicos, completamente rebobinables. La versión “E” ha sido estudiada para ofrecer una solución con una relación calidad-precio más conveniente respecto a la serie CL: la única diferencia es una reducida carga axial (1500 N en la versión CLE frente a los 3000 N de la serie CL), pero está realizada con los mismos materiales. Motores probados de serie y sumamente fiables que pueden acoplarse a cualquier bomba sumergible, no solo SAER, gracias a la conexión NEMA. Para temperaturas de hasta 25°C.
-
-
Stainless steel submersible pumps with noryl rotor for pumping drinking water in installations such as tubular and deep wells. They generate low noise levels and have an integrated check valve that ensures minimal pressure loss.
- Maximum discharge diameter: 2"
- Maximum flow: 27 m³/h
- Maximum pressure: 400m
- Maximum liquid temperature: 30°C
- Type of fluid handled: Clean water
-
Single-stage or multistage submersible electric pump for deep wells, for vertical or horizontal installation, built entirely in stainless steel, for well diameters of 150 mm (6”) and larger. Technical data • Caudal máximo: 80 m³/h • Presión máxima: 420 m • Temperatura máxima de operación: 50°C • Velocidad de giro máxima: 3500 rpm • Tipo de fluido que maneja: Agua limpia
-
Bombas centrífugas de cuerpo segmentados y aspiración simple, con una o múltiples etapas para instalación vertical u horizontal. Cuentan con sistemas hidráulicos mixtos con diámetros de impulsores reducidos, accionados por motores sumergibles. Ideales para sistemas de abastecimiento general, entre otras aplicaciones. • Caudal máximo: 1, 010m³/h • Presión máxima: 460 m • Temperatura máxima de operación: 50°C • Velocidad de giro máxima: 3500 rpm • Tipo de fluido que maneja: Agua limpia
-
-
Horizontal pump with radially split spiral casing in “back pull-out” design, with radial impeller, single-suction, single-stage, in accordance with DIN EN ISO 5199, measurements in accordance with DIN EN ISO 2858 complement the nominal diameters of DN25 and ≥DN200 , in a wide variety of materials and seals, also available with a wet shaft design and conical closing chamber. Available in ATEX version.
-
Horizontal centrifugal pumps with radially split cast casing with coupling in back-pull out design. Available with different types of impellers: unassailable, open and multi-channel. Recommended for pumping wastewater, chemical effluents, muddy and dense liquids, viscous liquids and liquids with suspended solids.
We are a hydraulic projects company founded in the Dominican Republic in 1988, dedicated to the sale, installation and maintenance of hydraulic equipment.
Hidrosistemas Dominicana, SRL | Website designed by chezaad.com