• DeltaBasic Pressure Boosting System

    Fully automatic pressure equipment with 2 or 3 (MVP) / 4 (SVP) vertical high pressure pumps in two variable speed models. The MVP and SVP variable speed models have continuous speed regulation on each pump through the frequency converter in the pump for asynchronous motors (MVP) or the PumpDrive speed regulation system and the KSB SuPremE motor (SVP), for fully electronic control of the required supply pressure. Equipped with central fuse box.

  • PumpMeter KSB

    The device consists of two pressure sensors and a display that records the pump load and indicates any potential for optimising the pump's efficiency and availability. The device consists of two pressure sensors and a display panel. PumpMeter is fully equipped at the factory and is configured according to the respective pump. It is connected via an M12 connector and is ready for immediate use.

  • Amacontrol KSB

    Protection module for clean water and waste water equipment. Protection and monitoring of submersible pumps and agitators using an all-in-one device for measuring motor and bearing temperature, leakage, vibration and voltage measurement.

  • Control panel

    At Hidrosistemas' we work with highly qualified technical personnel in the manufacture of the various controls necessary to operate the equipment. With all the necessary protections. In addition, we use certified quality components and world-renowned brands to safeguard the equipment.

  • AP – Self-priming pumps with electric motor, semi-open impeller

    Electric pump with open impeller for a maximum passage of solids of 8 mm. Suitable for irrigation, agriculture and drainage systems. • Maximum flow rate: 40 m³/h • Maximum height: 18.7 m • Maximum power: 3 hp • Maximum liquid temperature: 70°C • Rotation speed: 3600 rpm • Type of fluid handled: Clean water

  • HYDROBLOC CN pumps

    Compact, silent and easy to operate and maintain pumps, specially designed for pumping white water and non-chemically aggressive liquids in general industry applications, such as residential, irrigation, among others.
    • Maximum discharge diameter: 1"
    • Maximum flow: 15 m³/h
    • Maximum pressure: 46.2m
    • Maximum operating temperature: 70°C
    • Maximum turning speed: 3450rpm
    • Type of fluid handled: Clean water
  •

    MEGABLOC pump

    Single-stage monobloc pumps for a wide range of applications, with shaft protection bushing and replaceable wear rings and a simple mechanical seal with low operational cost that does not require external cooling. Their construction is of the back pull-out type and they can be installed in a horizontal, vertical or inclined position. • Maximum discharge diameter: 6″ • Maximum flow rate: 550 m³/h • Maximum pressure: 140 m • Maximum operating temperature: 90°C • Maximum rotation speed: 3500 rpm • Type of fluid handled: Clean water

  • CM – Single impeller centrifugal pumps

    Suitable for domestic installations, water supply, small gardening, increasing pressure in water supply networks. They ensure minimal hydraulic loss and, being designed and manufactured in Italy, are a guarantee of high quality. • Maximum flow rate: 8 m³/h • Maximum pressure: 59 m • Maximum power: 3 hp • Maximum operating temperature: 70°C • Maximum rotation speed: 3450 rpm • Type of fluid handled: Clean water

  • IR – Standard monobloc electric pump

    High performance SAER equipment in terms of performance and efficiency. Ideal for recirculation and conditioning systems, water supply and pressurization groups. Different types of mechanical closures available, also for food grade use.

  • 6 BP SERIES – Horizontal centrifugal electrobomas

    BP series electric pumps are used in sprinkler and flow irrigation systems, to extract water from lakes, rivers, tanks and for other industrial uses. • Maximum flow rate: 260 m³/h • Maximum pressure: 89 m • Maximum power: 40 hp • Maximum operating temperature: 120°C • Maximum rotation speed: 3450 rpm • Type of fluid handled: Clean water

  • OMEGA pumps

    Single-stage pumps with axially split spiral casing, with double suction radial rotor for horizontal and vertical installation. Horizontal drive installed, both on the left and direct sides of the pump (optional). Flanges meet DIN, EN or ASME requirements

  • MEGALINE pumps

    Single-stage radially divided volute casing monobloc pumps. Suction and discharge in line horizontally or vertically. It has a closed impeller, replaceable wear rings and a simple mechanical seal according to EN 12756. Back-pull-out design. Wide range of applications.

Title

We are a hydraulic projects company founded in the Dominican Republic in 1988, dedicated to the sale, installation and maintenance of hydraulic equipment.

  • (809) 537-8700

  • [email protected]

  • Cub Scout Street No. 3 Ens. Naco, National District, Dominican Republic.

Hidrosistemas Dominicana, SRL | Website designed by chezaad.com

× How can we help you?
Go to Top