• CM – Single impeller centrifugal pumps

    Suitable for domestic installations, water supply, small gardening, increasing pressure in water supply networks. They ensure minimal hydraulic loss and, being designed and manufactured in Italy, are a guarantee of high quality. • Maximum flow rate: 8 m³/h • Maximum pressure: 59 m • Maximum power: 3 hp • Maximum operating temperature: 70°C • Maximum rotation speed: 3450 rpm • Type of fluid handled: Clean water

  • UPA 150cc submersible electric pump

    Single-stage or multistage submersible electric pump for deep wells, for vertical or horizontal installation, built entirely in stainless steel, for well diameters of 150 mm (6”) and larger. Technical data • Caudal máximo: 80 m³/h • Presión máxima: 420 m • Temperatura máxima de operación: 50°C • Velocidad de giro máxima: 3500 rpm • Tipo de fluido que maneja: Agua limpia

  • Pumping equipment for fire protection

    They are specialized systems designed to provide a reliable supply of high-pressure water in the event of a fire. These equipment play a critical role in the safety of commercial, industrial, and residential buildings by ensuring sufficient water is available to effectively fight fires.

  • IR – Standard monobloc electric pump

    High performance SAER equipment in terms of performance and efficiency. Ideal for recirculation and conditioning systems, water supply and pressurization groups. Different types of mechanical closures available, also for food grade use.

  • KSB CLAS Submersible electric pump for wastewater

    Submersible, vertical centrifugal pump, polypropylene monobloc with noryl impeller, IP 68, single-stage, with level control in single-phase version, immersion depth 2 m. includes 10 m of cable. Applications: Automatic drainage of buckets, wells, tanks and warehouses at risk of flooding, reduction of surface water levels, drainage, drainage of underground passages, extraction of water from rivers and reservoirs.

  • KSB Drainvort

    Submersible, vertical, double-chamber, cast iron centrifugal pump with stainless steel impeller, IP 68, single-stage, with level control, immersion depth 5 m. Includes 10m of cable.
    • Untreated wastewater
    • Activated sludge
    • Circulation and heating sludge
    • Raw mud and rotten silt
    • mixed water
  •

    MegaCPK

    Horizontal pump with radially split spiral casing in “back pull-out” design, with radial impeller, single-suction, single-stage, in accordance with DIN EN ISO 5199, measurements in accordance with DIN EN ISO 2858 complement the nominal diameters of DN25 and ≥DN200 , in a wide variety of materials and seals, also available with a wet shaft design and conical closing chamber. Available in ATEX version.

  • MegaFlow

    Horizontal centrifugal pumps with radially split cast casing with coupling in back-pull out design. Available with different types of impellers: unassailable, open and multi-channel. Recommended for pumping wastewater, chemical effluents, muddy and dense liquids, viscous liquids and liquids with suspended solids.

  • Meganorm

    Single-stage horizontal pumps, horizontal single suction and vertical discharge. Design back-pull-back, allows maintenance and repair services to be carried out from the rear without affecting the alignment or fixing of the pipes. Dimensionally constructed according to DIN 24256 /ISO 2858 standard, and mechanically according to ANSI B 73.1 standard.

  • MK – Vertical axis multistage electropump

    Multistage electric pumps with vertical axis, without self-priming, of minimum dimensions, ideal for lifting equipment with or without autoclave, irrigation system and other applications for which it is necessary to achieve high pressures.  

  • CL 95 – CLE 95 engines

    CL 95 Motores sumergibles en baño de aceite, atóxicos, completamente rebobinables, conexión NEMA. Carga axial: de 3000 a 6500 N. Diseñados, fabricados y probados en los talleres SAER, los motores de la serie CL aseguran una gran fiabilidad. El Made in Italy garantiza altos estándares de calidad. Para temperaturas de hasta 35 °C. CLE 95 Motores sumergibles en baño de aceite, atóxicos, completamente rebobinables. La versión “E” ha sido estudiada para ofrecer una solución con una relación calidad-precio más conveniente respecto a la serie CL: la única diferencia es una reducida carga axial (1500 N en la versión CLE frente a los 3000 N de la serie CL), pero está realizada con los mismos materiales. Motores probados de serie y sumamente fiables que pueden acoplarse a cualquier bomba sumergible, no solo SAER, gracias a la conexión NEMA. Para temperaturas de hasta 25°C.

  • PumpMeter KSB

    El dispositivo consiste en dos sensores de presión y una pantalla que registra la carga de la bomba e indican cualquier potencial de optimización de la eficiencia y disponibilidad de la bomba. El dispositivo está formado por dos sensores de presión y un panel de visualización. PumpMeter viene totalmente equipado de fábrica y está configurado conforme a la bomba correspondiente. Se conecta mediante un conector M12 y está listo para funcionar de manera inmediata.

Title

We are a hydraulic projects company founded in the Dominican Republic in 1988, dedicated to the sale, installation and maintenance of hydraulic equipment.

  • (809) 537-8700

  • [email protected]

  • Cub Scout Street No. 3 Ens. Naco, National District, Dominican Republic.

Hidrosistemas Dominicana, SRL | Website designed by chezaad.com

× How can we help you?
Go to Top