• Fully automatic pressure equipment with 2 or 3 (MVP) / 4 (SVP) vertical high pressure pumps in two variable speed models. The MVP and SVP variable speed models have continuous speed regulation on each pump through the frequency converter in the pump for asynchronous motors (MVP) or the PumpDrive speed regulation system and the KSB SuPremE motor (SVP), for fully electronic control of the required supply pressure. Equipped with central fuse box.
  • El dispositivo consiste en dos sensores de presión y una pantalla que registra la carga de la bomba e indican cualquier potencial de optimización de la eficiencia y disponibilidad de la bomba. El dispositivo está formado por dos sensores de presión y un panel de visualización. PumpMeter viene totalmente equipado de fábrica y está configurado conforme a la bomba correspondiente. Se conecta mediante un conector M12 y está listo para funcionar de manera inmediata.
  • Módulo de Protección para equipos de agua limpia y aguas residuales. Protección y monitorización de bombas y agitadores sumergibles mediante dispositivo todo en uno para medida de temperatura del motor y rodamientos, medición de fugas, vibraciones y voltaje.
  • En Hidrosistemas’ trabajamos con personal técnico ampliamente calificado en la fabricación de los diversos controles necesarios para operar los equipos. Con todas las protecciones de lugar. Además, el uso de componentes de calidad certificada y marcas de renombre a nivel mundial para salvaguardar los equipos.
  • Electrobomba con impulsor abierto para un paso máximo de sólidos de 8 mm. Apta para sistemas de riego, agricultura y drenaje. • Caudal máximo: 40m³/h • Altura máxima: 18.7 m • Potencia máxima: 3 hp • Temperatura máxima del líquido: 70°C • Velocidad de giro: 3600 rpm • Tipo de fluido que maneja: Agua limpia
  • Bombas compactas, silenciosas y de fácil operación y mantenimiento, especialmente diseñadas para el bombeo de agua blanca y líquidos no agresivos químicamente en aplicaciones de la industria en general, como residencial, riego, entre otras.
    • Maximum discharge diameter: 1″
    • Maximum flow: 15 m³/h
    • Maximum pressure: 46,2 m
    • Maximum operating temperature: 70°C
    • Maximum turning speed: 3450 rpm
    • Type of fluid handled: Clean water
  • Single-stage monobloc pumps for a wide range of applications, with shaft protection bushing and replaceable wear rings and a simple mechanical seal with low operational cost that does not require external cooling. Their construction is of the back pull-out type and they can be installed in a horizontal, vertical or inclined position. • Maximum discharge diameter: 6″ • Maximum flow rate: 550 m³/h • Maximum pressure: 140 m • Maximum operating temperature: 90°C • Maximum rotation speed: 3500 rpm • Type of fluid handled: Clean water
  • Suitable for domestic installations, water supply, small gardening, increasing pressure in water supply networks. They ensure minimal hydraulic loss and, being designed and manufactured in Italy, are a guarantee of high quality. • Maximum flow rate: 8 m³/h • Maximum pressure: 59 m • Maximum power: 3 hp • Maximum operating temperature: 70°C • Maximum rotation speed: 3450 rpm • Type of fluid handled: Clean water
  • High performance SAER equipment in terms of performance and efficiency. Ideal for recirculation and conditioning systems, water supply and pressurization groups. Different types of mechanical closures available, also for food grade use.
  • BP series electric pumps are used in sprinkler and flow irrigation systems, to extract water from lakes, rivers, tanks and for other industrial uses. • Maximum flow rate: 260 m³/h • Maximum pressure: 89 m • Maximum power: 40 hp • Maximum operating temperature: 120°C • Maximum rotation speed: 3450 rpm • Type of fluid handled: Clean water
  • Single-stage pumps with axially split spiral casing, with double suction radial rotor for horizontal and vertical installation. Horizontal drive installed, both on the left and direct sides of the pump (optional). Flanges meet DIN, EN or ASME requirements
  • Single-stage radially divided volute casing monobloc pumps. Suction and discharge in line horizontally or vertically. It has a closed impeller, replaceable wear rings and a simple mechanical seal according to EN 12756. Back-pull-out design. Wide range of applications.

Title

Go to Top