• 6 BP SERIES – Horizontal centrifugal electrobomas

    BP series electric pumps are used in sprinkler and flow irrigation systems, to extract water from lakes, rivers, tanks and for other industrial uses. • Maximum flow rate: 260 m³/h • Maximum pressure: 89 m • Maximum power: 40 hp • Maximum operating temperature: 120°C • Maximum rotation speed: 3450 rpm • Type of fluid handled: Clean water

  • 6OP Horizontal multistage pump

    Pumping clean water and chemically non-aggressive liquids, for residential use, irrigation, agriculture, automated distribution in medium-sized tanks.

  • Amacontrol KSB

    Módulo de Protección para equipos de agua limpia y aguas residuales. Protección y monitorización de bombas y agitadores sumergibles mediante dispositivo todo en uno para medida de temperatura del motor y rodamientos, medición de fugas, vibraciones y voltaje.

  • Amarex N

    Submersible, vertical, single-stage, floodable and non-self-priming monobloc electric pumps, for installation in humid areas. They have a dilacerator (S), a free passage impeller (F) or a diagonal open channel (D), in a fixed and transportable version. Available in ATEX version, ideal for pumping raw, activated and digested sludge, dewatering and water extraction, drainage of rooms and surfaces subject to risk of flooding.
    • Maximum discharge diameter: 100mm
    • Maximum flow: 135 m³/h
    • Maximum pressure: 47m
    • Maximum operating temperature: 40°C
    • Maximum turning speed: 3500rpm
    • Type of fluid handled: Sludge
  •

    AP – Self-priming pumps with electric motor, semi-open impeller

    Electrobomba con impulsor abierto para un paso máximo de sólidos de 8 mm. Apta para sistemas de riego, agricultura y drenaje. • Caudal máximo: 40m³/h • Altura máxima: 18.7 m • Potencia máxima: 3 hp • Temperatura máxima del líquido: 70°C • Velocidad de giro: 3600 rpm • Tipo de fluido que maneja: Agua limpia

  • Movitec segmented body pump

    Vertical high-pressure, multi-cell centrifugal pump, monobloc design and segmented body, with suction and discharge flanges of identical nominal diameters in in-line arrangement. With KSB SuPremE, a magnetless synchronous reluctance motor (except: 0.55 kW / 0.75 kW 1500 rpm motor sizes are equipped with permanent magnets) with efficiency class IE4/IE5 according to IEC TS 60034-30 -2:2016, for use with speed regulation system of KSB PumpDrive 2 or PumpDrive 2 Eco models without rotor position sensors. The motor mounting points comply with EN 50347. The dimensions of the surrounding surface comply with DIN V 42673 (07-2011). Available in ATEX version.

  • MEGABLOC pump

    Single-stage monobloc pumps for a wide range of applications, with shaft protection bushing and replaceable wear rings and a simple mechanical seal with low operational cost that does not require external cooling. Their construction is of the back pull-out type and they can be installed in a horizontal, vertical or inclined position. • Maximum discharge diameter: 6″ • Maximum flow rate: 550 m³/h • Maximum pressure: 140 m • Maximum operating temperature: 90°C • Maximum rotation speed: 3500 rpm • Type of fluid handled: Clean water

  • Multitec pump

    It is a highly versatile and efficient pumping device designed for a wide variety of applications in the field of engineering and industry. This pump stands out for its ability to handle liquids reliably and effectively, making it an essential tool in various areas.

  • WKL pump

    Vertically sectioned horizontal multistage pumps, with suction casings sealed together by means of flat gaskets and externally by tie rods. Recommended for pumping clean liquids, free of suspended solids and not chemically and/or mechanically aggressive.

  • HYDROBLOC CN pumps

    Compact, silent and easy to operate and maintain pumps, specially designed for pumping white water and non-chemically aggressive liquids in general industry applications, such as residential, irrigation, among others.
    • Maximum discharge diameter: 1"
    • Maximum flow: 15 m³/h
    • Maximum pressure: 46.2m
    • Maximum operating temperature: 70°C
    • Maximum turning speed: 3450rpm
    • Type of fluid handled: Clean water
  •

    MEGALINE pumps

    Single-stage radially divided volute casing monobloc pumps. Suction and discharge in line horizontally or vertically. It has a closed impeller, replaceable wear rings and a simple mechanical seal according to EN 12756. Back-pull-out design. Wide range of applications.

  • OMEGA pumps

    Single-stage pumps with axially split spiral casing, with double suction radial rotor for horizontal and vertical installation. Horizontal drive installed, both on the left and direct sides of the pump (optional). Flanges meet DIN, EN or ASME requirements

Title

We are a hydraulic projects company founded in the Dominican Republic in 1988, dedicated to the sale, installation and maintenance of hydraulic equipment.

  • (809) 537-8700

  • [email protected]

  • Cub Scout Street No. 3 Ens. Naco, National District, Dominican Republic.

Hidrosistemas Dominicana, SRL | Website designed by chezaad.com

× How can we help you?
Go to Top