-
Fully automatic pressure equipment with 2 or 3 (MVP) / 4 (SVP) vertical high pressure pumps in two variable speed models. The MVP and SVP variable speed models have continuous speed regulation on each pump through the frequency converter in the pump for asynchronous motors (MVP) or the PumpDrive speed regulation system and the KSB SuPremE motor (SVP), for fully electronic control of the required supply pressure. Equipped with central fuse box. -
-
Submersible, vertical centrifugal pump, polypropylene monobloc with noryl impeller, IP 68, single-stage, with level control in single-phase version, immersion depth 2 m. includes 10 m of cable. Applications: Automatic drainage of buckets, wells, tanks and warehouses at risk of flooding, reduction of surface water levels, drainage, drainage of underground passages, extraction of water from rivers and reservoirs.
-
Submersible, vertical, single-stage, floodable and non-self-priming monobloc electric pumps, for installation in humid areas. They have a dilacerator (S), a free passage impeller (F) or a diagonal open channel (D), in a fixed and transportable version. Available in ATEX version, ideal for pumping raw, activated and digested sludge, dewatering and water extraction, drainage of rooms and surfaces subject to risk of flooding.
- Maximum discharge diameter: 100mm
- Maximum flow: 135 m³/h
- Maximum pressure: 47m
- Maximum operating temperature: 40°C
- Maximum turning speed: 3500rpm
- Type of fluid handled: Sludge
-
CL 95 Non-toxic, fully rewindable, oil-bath submersible motors, NEMA connection. Axial load: 3000 to 6500 N. Designed, manufactured and tested in SAER workshops, the CL series motors ensure high reliability. Made in Italy guarantees high quality standards. For temperatures up to 35°C. CLE 95 Non-toxic, fully rewindable, oil-bath submersible motors. The “E” version has been designed to offer a solution with a better quality-price ratio than the CL series: the only difference is a reduced axial load (1500 N in the CLE version compared to 3000 N for the CL series), but it is made from the same materials. Tested and extremely reliable motors as standard, which can be coupled to any submersible pump, not just SAER, thanks to the NEMA connection. For temperatures up to 25°C.
-
-
Stainless steel submersible pumps with noryl rotor for pumping drinking water in installations such as tubular and deep wells. They generate low noise levels and have an integrated check valve that ensures minimal pressure loss.
- Maximum discharge diameter: 2"
- Maximum flow: 27 m³/h
- Maximum pressure: 400m
- Maximum liquid temperature: 30°C
- Type of fluid handled: Clean water
-
Single-stage or multistage submersible electric pump for deep wells, for vertical or horizontal installation, built entirely in stainless steel, for well diameters of 150 mm (6”) and larger. Technical data • Maximum flow rate: 80 m³/h • Maximum pressure: 420 m • Maximum operating temperature: 50°C • Maximum rotation speed: 3500 rpm • Type of fluid handled: Clean water
-
Centrifugal pumps with segmented body and single suction, with one or multiple stages for vertical or horizontal installation. They have mixed hydraulic systems with reduced impeller diameters, driven by submersible motors. Ideal for general supply systems, among other applications. • Maximum flow: 1,010 m³/h • Maximum pressure: 460 m • Maximum operating temperature: 50°C • Maximum rotation speed: 3500 rpm • Type of fluid handled: Clean water
-
-
Horizontal pump with radially split spiral casing in “back pull-out” design, with radial impeller, single-suction, single-stage, in accordance with DIN EN ISO 5199, measurements in accordance with DIN EN ISO 2858 complement the nominal diameters of DN25 and ≥DN200 , in a wide variety of materials and seals, also available with a wet shaft design and conical closing chamber. Available in ATEX version.
-
Horizontal centrifugal pumps with radially split cast casing with coupling in back-pull out design. Available with different types of impellers: unassailable, open and multi-channel. Recommended for pumping wastewater, chemical effluents, muddy and dense liquids, viscous liquids and liquids with suspended solids.
-
Single-stage horizontal pumps, horizontal single suction and vertical discharge. Design back-pull-back, allows maintenance and repair services to be carried out from the rear without affecting the alignment or fixing of the pipes. Dimensionally constructed according to DIN 24256 /ISO 2858 standard, and mechanically according to ANSI B 73.1 standard.
-
-
-
-
-
Vertical high-pressure, multi-cell centrifugal pump, monobloc design and segmented body, with suction and discharge flanges of identical nominal diameters in in-line arrangement. With KSB SuPremE, a magnetless synchronous reluctance motor (except: 0.55 kW / 0.75 kW 1500 rpm motor sizes are equipped with permanent magnets) with efficiency class IE4/IE5 according to IEC TS 60034-30 -2:2016, for use with speed regulation system of KSB PumpDrive 2 or PumpDrive 2 Eco models without rotor position sensors. The motor mounting points comply with EN 50347. The dimensions of the surrounding surface comply with DIN V 42673 (07-2011). Available in ATEX version.
-
-
-
BP series electric pumps are used in sprinkler and flow irrigation systems, to extract water from lakes, rivers, tanks and for other industrial uses. • Maximum flow rate: 260 m³/h • Maximum pressure: 89 m • Maximum power: 40 hp • Maximum operating temperature: 120°C • Maximum rotation speed: 3450 rpm • Type of fluid handled: Clean water
-
-
Suitable for domestic installations, water supply, small gardening, increasing pressure in water supply networks. They ensure minimal hydraulic loss and, being designed and manufactured in Italy, are a guarantee of high quality. • Maximum flow rate: 8 m³/h • Maximum pressure: 59 m • Maximum power: 3 hp • Maximum operating temperature: 70°C • Maximum rotation speed: 3450 rpm • Type of fluid handled: Clean water
-
Single-stage monobloc pumps for a wide range of applications, with shaft protection bushing and replaceable wear rings and a simple mechanical seal with low operational cost that does not require external cooling. Their construction is of the back pull-out type and they can be installed in a horizontal, vertical or inclined position. • Maximum discharge diameter: 6″ • Maximum flow rate: 550 m³/h • Maximum pressure: 140 m • Maximum operating temperature: 90°C • Maximum rotation speed: 3500 rpm • Type of fluid handled: Clean water
-
Compact, silent and easy to operate and maintain pumps, specially designed for pumping white water and non-chemically aggressive liquids in general industry applications, such as residential, irrigation, among others.
- Maximum discharge diameter: 1"
- Maximum flow: 15 m³/h
- Maximum pressure: 46.2m
- Maximum operating temperature: 70°C
- Maximum turning speed: 3450rpm
- Type of fluid handled: Clean water
-
Electric pump with open impeller for a maximum passage of solids of 8 mm. Suitable for irrigation, agriculture and drainage systems. • Maximum flow rate: 40 m³/h • Maximum height: 18.7 m • Maximum power: 3 hp • Maximum liquid temperature: 70°C • Rotation speed: 3600 rpm • Type of fluid handled: Clean water
-
-
-
The device consists of two pressure sensors and a display that records the pump load and indicates any potential for optimising the pump's efficiency and availability. The device consists of two pressure sensors and a display panel. PumpMeter is fully equipped at the factory and is configured according to the respective pump. It is connected via an M12 connector and is ready for immediate use. -
Fully automatic pressure equipment with 2 or 3 (MVP) / 4 (SVP) vertical high pressure pumps in two variable speed models. The MVP and SVP variable speed models have continuous speed regulation on each pump through the frequency converter in the pump for asynchronous motors (MVP) or the PumpDrive speed regulation system and the KSB SuPremE motor (SVP), for fully electronic control of the required supply pressure. Equipped with central fuse box.
We are a hydraulic projects company founded in the Dominican Republic in 1988, dedicated to the sale, installation and maintenance of hydraulic equipment.
Hidrosistemas Dominicana, SRL | Website designed by chezaad.com