-
BP series electric pumps are used in sprinkler and flow irrigation systems, to extract water from lakes, rivers, tanks and for other industrial uses. • Maximum flow rate: 260 m³/h • Maximum pressure: 89 m • Maximum power: 40 hp • Maximum operating temperature: 120°C • Maximum rotation speed: 3450 rpm • Type of fluid handled: Clean water -
-
-
Submersible, vertical, single-stage, floodable and non-self-priming monobloc electric pumps, for installation in humid areas. They have a dilacerator (S), a free passage impeller (F) or a diagonal open channel (D), in a fixed and transportable version. Available in ATEX version, ideal for pumping raw, activated and digested sludge, dewatering and water extraction, drainage of rooms and surfaces subject to risk of flooding.
- Maximum discharge diameter: 100mm
- Maximum flow: 135 m³/h
- Maximum pressure: 47m
- Maximum operating temperature: 40°C
- Maximum turning speed: 3500rpm
- Type of fluid handled: Sludge
-
Electric pump with open impeller for a maximum passage of solids of 8 mm. Suitable for irrigation, agriculture and drainage systems. • Maximum flow rate: 40 m³/h • Maximum height: 18.7 m • Maximum power: 3 hp • Maximum liquid temperature: 70°C • Rotation speed: 3600 rpm • Type of fluid handled: Clean water
-
Vertical high-pressure, multi-cell centrifugal pump, monobloc design and segmented body, with suction and discharge flanges of identical nominal diameters in in-line arrangement. With KSB SuPremE, a magnetless synchronous reluctance motor (except: 0.55 kW / 0.75 kW 1500 rpm motor sizes are equipped with permanent magnets) with efficiency class IE4/IE5 according to IEC TS 60034-30 -2:2016, for use with speed regulation system of KSB PumpDrive 2 or PumpDrive 2 Eco models without rotor position sensors. The motor mounting points comply with EN 50347. The dimensions of the surrounding surface comply with DIN V 42673 (07-2011). Available in ATEX version.
-
Single-stage monobloc pumps for a wide range of applications, with shaft protection bushing and replaceable wear rings and a simple mechanical seal with low operational cost that does not require external cooling. Their construction is of the back pull-out type and they can be installed in a horizontal, vertical or inclined position. • Maximum discharge diameter: 6″ • Maximum flow rate: 550 m³/h • Maximum pressure: 140 m • Maximum operating temperature: 90°C • Maximum rotation speed: 3500 rpm • Type of fluid handled: Clean water
-
-
-
Compact, silent and easy to operate and maintain pumps, specially designed for pumping white water and non-chemically aggressive liquids in general industry applications, such as residential, irrigation, among others.
- Maximum discharge diameter: 1"
- Maximum flow: 15 m³/h
- Maximum pressure: 46.2m
- Maximum operating temperature: 70°C
- Maximum turning speed: 3450rpm
- Type of fluid handled: Clean water
-
-
We are a hydraulic projects company founded in the Dominican Republic in 1988, dedicated to the sale, installation and maintenance of hydraulic equipment.
Hidrosistemas Dominicana, SRL | Website designed by chezaad.com