• Meganorm

    Single-stage horizontal pumps, horizontal single suction and vertical discharge. Design back-pull-back, allows maintenance and repair services to be carried out from the rear without affecting the alignment or fixing of the pipes. Dimensionally constructed according to DIN 24256 /ISO 2858 standard, and mechanically according to ANSI B 73.1 standard.

  • MK – Vertical axis multistage electropump

    Multistage electric pumps with vertical axis, without self-priming, of minimum dimensions, ideal for lifting equipment with or without autoclave, irrigation system and other applications for which it is necessary to achieve high pressures.  

  • 6OP Horizontal multistage pump

    Pumping clean water and chemically non-aggressive liquids, for residential use, irrigation, agriculture, automated distribution in medium-sized tanks.

  • Multitec pump

    It is a highly versatile and efficient pumping device designed for a wide variety of applications in the field of engineering and industry. This pump stands out for its ability to handle liquids reliably and effectively, making it an essential tool in various areas.

  • WKL pump

    Vertically sectioned horizontal multistage pumps, with suction casings sealed together by means of flat gaskets and externally by tie rods. Recommended for pumping clean liquids, free of suspended solids and not chemically and/or mechanically aggressive.

  • Movitec segmented body pump

    Vertical high-pressure, multi-cell centrifugal pump, monobloc design and segmented body, with suction and discharge flanges of identical nominal diameters in in-line arrangement. With KSB SuPremE, a magnetless synchronous reluctance motor (except: 0.55 kW / 0.75 kW 1500 rpm motor sizes are equipped with permanent magnets) with efficiency class IE4/IE5 according to IEC TS 60034-30 -2:2016, for use with speed regulation system of KSB PumpDrive 2 or PumpDrive 2 Eco models without rotor position sensors. The motor mounting points comply with EN 50347. The dimensions of the surrounding surface comply with DIN V 42673 (07-2011). Available in ATEX version.

  • MEGALINE pumps

    Single-stage radially divided volute casing monobloc pumps. Suction and discharge in line horizontally or vertically. It has a closed impeller, replaceable wear rings and a simple mechanical seal according to EN 12756. Back-pull-out design. Wide range of applications.

  • OMEGA pumps

    Single-stage pumps with axially split spiral casing, with double suction radial rotor for horizontal and vertical installation. Horizontal drive installed, both on the left and direct sides of the pump (optional). Flanges meet DIN, EN or ASME requirements

  • 6 BP SERIES – Horizontal centrifugal electrobomas

    BP series electric pumps are used in sprinkler and flow irrigation systems, to extract water from lakes, rivers, tanks and for other industrial uses. • Maximum flow rate: 260 m³/h • Maximum pressure: 89 m • Maximum power: 40 hp • Maximum operating temperature: 120°C • Maximum rotation speed: 3450 rpm • Type of fluid handled: Clean water

  • IR – Standard monobloc electric pump

    High performance SAER equipment in terms of performance and efficiency. Ideal for recirculation and conditioning systems, water supply and pressurization groups. Different types of mechanical closures available, also for food grade use.

  • CM – Single impeller centrifugal pumps

    Suitable for domestic installations, water supply, small gardening, increasing pressure in water supply networks. They ensure minimal hydraulic loss and, being designed and manufactured in Italy, are a guarantee of high quality. • Maximum flow rate: 8 m³/h • Maximum pressure: 59 m • Maximum power: 3 hp • Maximum operating temperature: 70°C • Maximum rotation speed: 3450 rpm • Type of fluid handled: Clean water

  • MEGABLOC pump

    Single-stage monobloc pumps for a wide range of applications, with shaft protection bushing and replaceable wear rings and a simple mechanical seal with low operational cost that does not require external cooling. Their construction is of the back pull-out type and they can be installed in a horizontal, vertical or inclined position. • Maximum discharge diameter: 6″ • Maximum flow rate: 550 m³/h • Maximum pressure: 140 m • Maximum operating temperature: 90°C • Maximum rotation speed: 3500 rpm • Type of fluid handled: Clean water

We are a hydraulic projects company founded in the Dominican Republic in 1988, dedicated to the sale, installation and maintenance of hydraulic equipment.

  • (809) 537-8700

  • info@hidrosistemasrd.com

  • Cub Scout Street No. 3 Ens. Naco, National District, Dominican Republic.

Hidrosistemas Dominicana, SRL | Website designed by chezaad.com

Go to Top