• Movitec segmented body pump

    Vertical high-pressure, multi-cell centrifugal pump, monobloc design and segmented body, with suction and discharge flanges of identical nominal diameters in in-line arrangement. With KSB SuPremE, a magnetless synchronous reluctance motor (except: 0.55 kW / 0.75 kW 1500 rpm motor sizes are equipped with permanent magnets) with efficiency class IE4/IE5 according to IEC TS 60034-30 -2:2016, for use with speed regulation system of KSB PumpDrive 2 or PumpDrive 2 Eco models without rotor position sensors. The motor mounting points comply with EN 50347. The dimensions of the surrounding surface comply with DIN V 42673 (07-2011). Available in ATEX version.

  • WKL pump

    Vertically sectioned horizontal multistage pumps, with suction casings sealed together by means of flat gaskets and externally by tie rods. Recommended for pumping clean liquids, free of suspended solids and not chemically and/or mechanically aggressive.

  • Multitec pump

    It is a highly versatile and efficient pumping device designed for a wide variety of applications in the field of engineering and industry. This pump stands out for its ability to handle liquids reliably and effectively, making it an essential tool in various areas.

  • 6OP Horizontal multistage pump

    Pumping clean water and chemically non-aggressive liquids, for residential use, irrigation, agriculture, automated distribution in medium-sized tanks.

  • MK – Vertical axis multistage electropump

    Multistage electric pumps with vertical axis, without self-priming, of minimum dimensions, ideal for lifting equipment with or without autoclave, irrigation system and other applications for which it is necessary to achieve high pressures.  

  • Meganorm

    Single-stage horizontal pumps, horizontal single suction and vertical discharge. Design back-pull-back, allows maintenance and repair services to be carried out from the rear without affecting the alignment or fixing of the pipes. Dimensionally constructed according to DIN 24256 /ISO 2858 standard, and mechanically according to ANSI B 73.1 standard.

  • MegaFlow

    Horizontal centrifugal pumps with radially split cast casing with coupling in back-pull out design. Available with different types of impellers: unassailable, open and multi-channel. Recommended for pumping wastewater, chemical effluents, muddy and dense liquids, viscous liquids and liquids with suspended solids.

  • MegaCPK

    Horizontal pump with radially split spiral casing in “back pull-out” design, with radial impeller, single-suction, single-stage, in accordance with DIN EN ISO 5199, measurements in accordance with DIN EN ISO 2858 complement the nominal diameters of DN25 and ≥DN200 , in a wide variety of materials and seals, also available with a wet shaft design and conical closing chamber. Available in ATEX version.

  • Pumping equipment for fire protection

    They are specialized systems designed to provide a reliable supply of high-pressure water in the event of a fire. These equipment play a critical role in the safety of commercial, industrial, and residential buildings by ensuring sufficient water is available to effectively fight fires.

  • UPA 200 / 250 / 300 / 350

    Centrifugal pumps with segmented body and single suction, with one or multiple stages for vertical or horizontal installation. They have mixed hydraulic systems with reduced impeller diameters, driven by submersible motors. Ideal for general supply systems, among other applications. • Maximum flow: 1,010 m³/h • Maximum pressure: 460 m • Maximum operating temperature: 50°C • Maximum rotation speed: 3500 rpm • Type of fluid handled: Clean water

  • UPA 150cc submersible electric pump

    Single-stage or multistage submersible electric pump for deep wells, for vertical or horizontal installation, built entirely in stainless steel, for well diameters of 150 mm (6”) and larger. Technical data • Maximum flow rate: 80 m³/h • Maximum pressure: 420 m • Maximum operating temperature: 50°C • Maximum rotation speed: 3500 rpm • Type of fluid handled: Clean water

  • UPAchrom 100 CN

    Stainless steel submersible pumps with noryl rotor for pumping drinking water in installations such as tubular and deep wells. They generate low noise levels and have an integrated check valve that ensures minimal pressure loss.
    • Maximum discharge diameter: 2"
    • Maximum flow: 27 m³/h
    • Maximum pressure: 400m
    • Maximum liquid temperature: 30°C
    • Type of fluid handled: Clean water

We are a hydraulic projects company founded in the Dominican Republic in 1988, dedicated to the sale, installation and maintenance of hydraulic equipment.

  • (809) 537-8700

  • info@hidrosistemasrd.com

  • Cub Scout Street No. 3 Ens. Naco, National District, Dominican Republic.

Hidrosistemas Dominicana, SRL | Website designed by chezaad.com

Go to Top